Mold Treatment

Molds are fungi that grow best in warm, damp, and humid conditions. It can be found both indoors and outdoors, and spreads and reproduces by making spores, which can survive harsh environmental conditions.

Mold can enter your home through open doorways, windows, vents, and heating and air conditioning systems. Unfortunately, it is often very difficult to make out between toxic molds and those that don't pose a risk.

Because everyone reacts to mold differently, the effects of the mold can be different from person to person, and some people may be more vulnerable than others.

At Mountain Air, we clean the entire mold affected area, and perform a final clean of the affected air. We make sure your home is cleaned in a timely and effective manner. We will provide the suitable equipment, protective clothing and training to safely test and rectify a mold problem. Our technicians have real world proficiency in drying all kinds of environments, quickly and cost effectively returning facilities to pre-incident condition.

We can help you if you have any kind of mold problem, from small little isolated areas of mold, to whole houses that are contaminated. We can also help you to discover why you are having a mold problem, if the problem isn't apparent. 

Positive or Negative result within 10 Minutes .
No Lab Work Required .

Are you or your family suffering from any of these symptoms?

• Persistent cough
• Asthma -like or breathing difficulties
• Allergic symptoms
• Unexplained, recurring illness

Introducing the fastest and most reliable mold test kit available!

• No complicated set -up . Quick and easy to use, just 4 simple steps
• No lab fees
• Immediate biochemical reaction
• Results within 10 minutes, with a simple color change

The Mold Test kit is intended as a preliminary screen for potential mold and /or microbial growth on common interior finishes of residential and commercial structures such as drywall . You should use the Mold Test when you see visible discoloration or staining that you suspect is mold growth . Testing visibly clean surfaces will almost always give you a negative result .

The colorimetric reaction used for this test is based on the presence of specific protein and carbohydrate substances . As such, certain organic substrates such as untreated wood, excessive house dust, food, etc . could yield a false positive result . In addition, this test will not distinguish between different types of mold or other microbial growth .

As with all screening tests, the Mold Test is only one tool . If you see mold growing, or organic material in your home (wallboard, clothing, furniture, etc ) was wet for more than 24 - 48 hours, it is advisable to call a mold inspector . As always, if you are experiencing health symptoms and suspect mold as a cause, see a physician .
Using the Mold Test Kit is Easy

Step 1 : Remove the 10 Minute Mold Test swab .
Step 2 : Swab the test surface . ( 4 inches horizontal and vertical ).
Step 3 : Firmly press down the handle into the swab tube, with your thumb break the stick inside the bulb releasing the solution and shake rapidly from side to side for at least 5 seconds .
Step 4 : Wait 10 minutes for results and measure the solution against the 10 Minute Mold Test label . IF IT’S GREEN IT’S CLEAN !

If your test result is positive, and you suspect that you have mold growing indoors, then hiring a qualified professional to further inspect your home is a good idea .

The EPA recommends, “If you believe that you may have a hidden mold problem, consider hiring a professional . ”
(Brief Guide to Mold, p . 14, EPA )